The 25 pot automatic watering kit contains:
- 1 x Select Controller (1)
- 1 x Pressure Reducer (2)
- 15m x 13mm Supply Tube (3)
- 10m x 4mm Micro Tube
- 15 x 4LPH Nozzle Drippers with Stake (5)
- 10 x 4LPH End-of-line Drippers (6)
- 14 x 4mm T-Connectors
- 10 x 13mm Hose Adaptors
- 1 x 13mm T-Connector
- 2 x 13mm Elbow Connectors
- 5 x Wall Clips
- 10 x 13mm Tube Adaptors
- 10 x Blanking Plugs
- 1 x 4mm Tube Adaptor
- 2 x End Sleeves
- 5 x Saddle Clamps
- 1 x 3/4 – 1/2” Tap Adaptor
- 1 x 1 – 3/4” Tap Adaptor
- 1 x Hole Punch
- Simple and easy to use
- 16 pre-set programs to supply water from once a week up to four times a day
- Manual watering function, allowing you to water whenever you need
- Battery operated making setup simple
- Can be conveniently used with a water butt
- Complete with a range of connectors to fit your tap
Building the network – the flexible tube can be cut and adapted to create your ideal watering system layout. It efficiently carries water from the main supply and delivers it to your plants via a network of drippers.
The kit provides automatic watering for your patio, potted plants and hanging baskets, leaving you free to enjoy your garden. Automatic drip irrigation is the most durable and effective type of automatic watering for gardens, with tests showing 90% greater efficiency than a spray gun or sprinkler.
Saves time & water – using this micro-drip system not only saves time but also saves water. Drippers can be positioned to deliver water with pin-point accuracy directly to the roots of the plant, where it needs it most. This watering kit can be set up in minutes and for larger areas, components can be added to create a customised watering system.
Drip irrigation facilitates slow the delivery of water (one hose consumes 91 litres per minute) to the plant’s root zone, right where it is needed.
Pressure Compensation – the Pressure Compensating drippers emit exactly the same amount of water regardless of elevation or location within the system.
Simple to Install and maintain – the drippers can be dismantled and reassembled for debris removal or to be cleaned of limescale to ensure the water continues to flow.
Attach directly into the supply pipe by piercing a hole in the pipe wall and inserting the barbed inlet of the dripper. Use the ground stake to secure drippers with stake in place so water droplets are accurately delivered.
The End of Line Dripper is ideally suited for spot irrigation of single standing plants, for use in troughs, grow bags and round containers.
As required, use the T connectors, wall clips and tube adaptors to help you to create the run and layout you need.